Determination of thermo-mechanical variables during plain strain compression testing by Buchanan, James McCallum

“…The study showed that gTapbite lubrication breakdown occurs progressively above 300 °C, leading to a change in strain and strain rare distribution because of an increased coef6cient of friction as the test temperature is increased. …”
Get full text

Passive acoustic monitoring of animal populations with compressed sensing by Rasolofohery, Milanto Ferdinand

Get full text

A prospective study: Investigating the use of oncologist-read CT scans in the investigation of suspected malignant spinal cord compression by Fairhead, Sarah

Get full text

The behaviour of fibre reinforced concrete (SHCC) under biaxial compression and tension by Swanepoel, Willie

Get full text

Design of a forward error correction algorithm for a satellite modem by Sefara, Mamphoko Nelly

Get full text

Experimental study of shear behaviour of high density polyethylene reinforced sand under triaxial compression by Wanyama, Paul

“…The plastic strip reinforcement parameters comprised of 7.5 mm to 30 mm lengths, and concentrations of 0.1 % to 0.3 % by weight of dry sand. Triaxial compression tests were performed using confining pressures of 50 kPa, 100 kPa, 200 kPa, 300 kPa and 400 kPa at a shear rate of 0.075 %/min, and to a maximum strain of 10 %. …”
Get full text

Using superabsorbent polymers in high performance concrete to mitigate autogenous and plastic shrinkage while observing the compressive strength by Ebrahim, Nuraan

Get full text

Innovative cleaner production technique: foam glass production from lead crystal glass sludge by ElKersh, Hussein Abdel Fattah

“…The leaching test of the sludge showed that it is a hazardous waste because its leachate has a lead concentration of 7.5 mg/l, while the leachate of the produced foam glass was proved to have a negligible lead concentration of less than 0.02 mg/l. …”
Get full text
Get full text

A Volume of Fluid (VoF) based all-mach HLLC Solver for Multi-Phase Compressible Flow with Surface-Tension by Oomar, Muhammad Yusufali

“…In particular, the use of the HLLC-VoF combination leads to a sharp volume fraction and energy field with improved accuracy (up to secondorder).…”
Get full text

Comparative evaluation of the compressive strength surface hardness and porosity of a selection of capsule-mixed versus hand-mixed Glass lonomer cements

Get full text

Finite element analysis of a corrugated board panel by Cillie, Johan Hendrik

Get full text

Investigating effects of interpass time during hot finish rolling on the evolution of texture in AA3104 Can Body Stock by Chaole, Nkopo

“…This study investigated the microstructure and texture evolution in AA3104 can body stock (CBS) during hot finish rolling by simulating multi-pass, high-temperature plane strain compression tests on a Gleeble 3800. Two scenarios were simulated: Position A, with a longer inter-pass time between the first two passes and a shorter time before the third pass, and Position B, with reversed timings. …”
Get full text

The response of flat slab-column connections of reinforced concrete to high-cycle lateral motion of low amplitude by Dunaiski, Peter Ernst

Get full text

A framework for sustainable slum development based on zero waste concept: "Learn to Earn Model" by Elgizawy, Sally Maher

“…This research touches on the complexities of sustainable slum development specially dealing with slum dwellers in a trial to enhance their capacities and potential which would benefit the community and lead to the development of the slum. Teaching them new skills through the "Learn to Earn Model'', will help them generate income which turns the slum into a catalyst for the economy rather than a burden on it. …”
Get full text
Get full text

The Disintegration characteristics of residual granite soil by Mong, Danica

Get full text

A robust intelligent readiness framework for ransomware forensics

Get full text
Get full text
Get full text

Characterisation of Glass Fibre Polypropylene and GFPP based Fibre Metal Laminates at high strain rates by Govender, Reuben Ashley

“…High strain rate (5x10^2 to 10^3 /s) compression tests were conducted on GFPP using a compressive Split Hopkinson Pressure Bar (SHPB) and a Direct Impact Hopkinson Pressure Bar (DIHPB), in the through-thickness and in-plane directions. …”
Get full text

Fabrication and characterization of aluminum-carbon nanotubes (Al-CNT) functionally graded cylinders by Morad, Sherry Samy

“…Powder metallurgy process was followed; starting with cold compaction and followed by sintering, then hot extrusion to produce compacts of Al-CNT FGMs of high density. Mechanical testing and characterization were carried out on the produced specimens and these included; mechanical compression, tension, optical microscopy, scanning electron microscopy as well as nanoindentation. …”
Get full text
Get full text

Microchannel flow fields for polymer electrolyte fuel cells by Chivengwa, Tapiwa

“…Among the various types of fuel cells, the polymer electrolyte fuel cell (PEFC) is the leading candidate for portable, automotive and more recently stationary applications. …”
Get full text

The role of cracks and chlorides in corrosion of reinforced strain hardening cement-based composite (R/SHCC) by Paul, Suvash Chandra

Get full text