Full Text Available
Note: Clicking the button above will open the full text document at the original institutional repository in a new window.
Investigating the fine milling of pigment in a colourant formulation on the Bühler PML2 Superflow mill
Stirred media mills remain the most suitable option in the coatings industry for the ultrafine grinding of colourants. The fineness of grind and colourant tint strength are typically used as indicators for the end of a production run during colourant manufacturing. These typical parameters from the...
Saved in:
| Main Author: | |
|---|---|
| Other Authors: | |
| Format: | Thesis |
| Language: | English |
| Published: |
Department of Chemical Engineering
2022
|
| Subjects: | |
| Tags: |
No Tags, Be the first to tag this record!
|
| _version_ | 1867613421125500928 |
|---|---|
| access_status_str | Open Access |
| author | Lewis, Emily |
| author2 | van der Westhuizen, Andre |
| author_browse | Lewis, Emily van der Westhuizen, Andre |
| author_facet | van der Westhuizen, Andre Lewis, Emily |
| author_sort | Lewis, Emily |
| collection | Thesis |
| description | Stirred media mills remain the most suitable option in the coatings industry for the ultrafine grinding of colourants. The fineness of grind and colourant tint strength are typically used as indicators for the end of a production run during colourant manufacturing. These typical parameters from the coatings industry make it difficult to recognise whether the end point of a production run to maximise the product yield has actually been reached, without excessive time or energy. Including particle size analysis, to enable the analysis of energy efficiency and production performance, could assist to understand the impact of the various milling parameters. This study compares the various experimental approaches that can be taken to understand milling performances during colourant production. A laboratory scale, Bühler Superflow, vertical, stirred media mill is used, with a yellow lead (II) chromate colourant. The milling parameters reviewed included rotor tip speed, the media filling level, the media size and solid content of the colourant suspension. A three-level factorial design of experiments was used for each parameter. The results are analysed in terms of the Kwade stress model and the one factor at a time approach, as well as a response surface study. The significant interaction effects (ie, p-value < 0.5) identified using the response surface study included the tip speed / media size (AC) and media filling level / media size (BC) interaction terms for both the energy efficiency and rate models. For the power model, the tip speed / media filling level (AB) and tip speed / solids content of the colourant suspension (AD) interaction terms were deemed significant. This confirmation disqualified the one factor at a time method as a viable means to determine optimal milling performance. The results did, however, confirm the validity of the stress energy model as a minimum stress energy of 0.067x10-3Nm was identifiable across the different specific energy input levels. This methodology would be most useful for future colourant production optimisation studies. As part of the model validation, the higher stirrer tip speed of 7.3m/s, higher solids content of 55wt% and lower media size of 0.8mm paired with a mid-level media filling level of 87% was identified as the optimal combination of parameters to maximise the production rate and energy efficiency. |
| format | Thesis |
| id | oai:open.uct.ac.za:11427/35542 |
| institution | University of Cape Town (South Africa) |
| language | eng |
| last_indexed | 2026-06-10T12:35:52.703Z |
| license_str | Not specified — see source repository |
| provenance_str_mv | Harvested via OAI-PMH from UCTD — University of Cape Town Open Access Repository |
| publishDate | 2022 |
| publishDateRange | 2022 |
| publishDateSort | 2022 |
| publisher | Department of Chemical Engineering |
| publisherStr | Department of Chemical Engineering |
| record_format | dspace |
| source_str | UCTD — University of Cape Town Open Access Repository |
| spelling | oai:open.uct.ac.za:11427/35542 Investigating the fine milling of pigment in a colourant formulation on the Bühler PML2 Superflow mill Lewis, Emily van der Westhuizen, Andre Mainza, Aubrey Chemical Engineering Stirred media mills remain the most suitable option in the coatings industry for the ultrafine grinding of colourants. The fineness of grind and colourant tint strength are typically used as indicators for the end of a production run during colourant manufacturing. These typical parameters from the coatings industry make it difficult to recognise whether the end point of a production run to maximise the product yield has actually been reached, without excessive time or energy. Including particle size analysis, to enable the analysis of energy efficiency and production performance, could assist to understand the impact of the various milling parameters. This study compares the various experimental approaches that can be taken to understand milling performances during colourant production. A laboratory scale, Bühler Superflow, vertical, stirred media mill is used, with a yellow lead (II) chromate colourant. The milling parameters reviewed included rotor tip speed, the media filling level, the media size and solid content of the colourant suspension. A three-level factorial design of experiments was used for each parameter. The results are analysed in terms of the Kwade stress model and the one factor at a time approach, as well as a response surface study. The significant interaction effects (ie, p-value < 0.5) identified using the response surface study included the tip speed / media size (AC) and media filling level / media size (BC) interaction terms for both the energy efficiency and rate models. For the power model, the tip speed / media filling level (AB) and tip speed / solids content of the colourant suspension (AD) interaction terms were deemed significant. This confirmation disqualified the one factor at a time method as a viable means to determine optimal milling performance. The results did, however, confirm the validity of the stress energy model as a minimum stress energy of 0.067x10-3Nm was identifiable across the different specific energy input levels. This methodology would be most useful for future colourant production optimisation studies. As part of the model validation, the higher stirrer tip speed of 7.3m/s, higher solids content of 55wt% and lower media size of 0.8mm paired with a mid-level media filling level of 87% was identified as the optimal combination of parameters to maximise the production rate and energy efficiency. 2022-01-20T12:35:45Z 2022-01-20T12:35:45Z 2021 2022-01-20T12:18:15Z Master Thesis Masters MSc http://hdl.handle.net/11427/35542 eng application/pdf Department of Chemical Engineering Faculty of Engineering and the Built Environment |
| spellingShingle | Chemical Engineering Lewis, Emily Investigating the fine milling of pigment in a colourant formulation on the Bühler PML2 Superflow mill |
| thesis_degree_str | Master's |
| title | Investigating the fine milling of pigment in a colourant formulation on the Bühler PML2 Superflow mill |
| title_full | Investigating the fine milling of pigment in a colourant formulation on the Bühler PML2 Superflow mill |
| title_fullStr | Investigating the fine milling of pigment in a colourant formulation on the Bühler PML2 Superflow mill |
| title_full_unstemmed | Investigating the fine milling of pigment in a colourant formulation on the Bühler PML2 Superflow mill |
| title_short | Investigating the fine milling of pigment in a colourant formulation on the Bühler PML2 Superflow mill |
| title_sort | investigating the fine milling of pigment in a colourant formulation on the buhler pml2 superflow mill |
| topic | Chemical Engineering |
| url | http://hdl.handle.net/11427/35542 |
| work_keys_str_mv | AT lewisemily investigatingthefinemillingofpigmentinacolourantformulationonthebuhlerpml2superflowmill |