Full Text Available
Note: Clicking the button above will open the full text document at the original institutional repository in a new window.
Monolith Catalyst Supports for Hydrogen Production
Due to increasing energy demands and environmental concerns, more research studies arc conducted on alternative energy sources. Hydrogen fuel cells arc one of the desired alternatives. The CCT Catalysis Institute has demonstrated the entire hydrogen production process from propane (LPG) reforming. T...
Saved in:
| Main Author: | |
|---|---|
| Other Authors: | |
| Format: | Thesis |
| Language: | English |
| Published: |
Department of Chemical Engineering
2022
|
| Subjects: | |
| Tags: |
No Tags, Be the first to tag this record!
|
| _version_ | 1867613339702525952 |
|---|---|
| access_status_str | Open Access |
| author | Mzolo, Ntokozo |
| author2 | Fletcher, Jack C Q |
| author_browse | Fletcher, Jack C Q Mzolo, Ntokozo |
| author_facet | Fletcher, Jack C Q Mzolo, Ntokozo |
| author_sort | Mzolo, Ntokozo |
| collection | Thesis |
| description | Due to increasing energy demands and environmental concerns, more research studies arc conducted on alternative energy sources. Hydrogen fuel cells arc one of the desired alternatives. The CCT Catalysis Institute has demonstrated the entire hydrogen production process from propane (LPG) reforming. This is aimed for off-grid and backup pOver supply to rural areas and telecommunication towers respectively. The steam reforming unit employs ruthenium supported on gamma-alumina (Ru/ -AbOo) catalyst.. However, it has been observed that. upon increasing the sea.le, pressure-drop and mass transfer limitations become significant issues. It is, therefore, desired to shift from packed bed reactors to monolithic reactors to overcome these issues. :Vfonoliths arc attractive due to their high open frontal area., stability, good mass and heat transfer, as well as easy sea.ling up. The main focus of this study is to coat. monoliths ,vith a. homogeneous and stable layer of Ru/ AbO3. Viscosity, pH and slurry solid content are investigated as these are the main factors affecting washcoat loading, morphology and adherence. A slurry coating technique was used to deposit. the alumina. layer onto t he monolit hs which were then subjected to ult.ra.sonica.t ion and thermal shock treatment. to test. for adherence. The active phase ,vas deposited by ion exchange and dry impregnation of the alumina coated monoliths by making use of a RuCb.xH"O solution. SEivI was employed to analyse the morphology of the layer, as well as its metal content and distribution. An experimental design soft,vare, Design Expert. was used to generate statistically significant and robust models for the results. It was found that washcoat loading, stability and morphology arc highly dependent on slurry solid content betvveen 20 and 45 v,rt.%, slightly affected by viscosity bet,veen 20 and 45 mPa.s and almost insensitive to pH beluw isoelectric point. Increasing slurry solid content results in an increase in washcoat loading which, in turn, results in thick and inhomogeneous layers which, in turn, arc more prone to cracking and to lo,v mcclmnical and thermal stability. The optimal point. that. gives a. st.able, homogeneous layer a.t the desired loading was identified to be at pH of 4, viscosity of 20 mPa.s and slurry solid content of 20 wt%. The resulting washcoat. layer is 'crack-free', uniform, and characterised by a washcoat loading of 10.8 wt%, an average thickness of 30 m, and mechanical and thermal weight losses of 0.79 and 1.42 wt%., respectively. The ion exchange techniques resulted in small and poorly distributed metal loading while dry impregnation resulted in sufficient metal loading and good distribution throughout t.he monolith channels. |
| format | Thesis |
| id | oai:open.uct.ac.za:11427/36032 |
| institution | University of Cape Town (South Africa) |
| language | eng |
| last_indexed | 2026-06-10T12:34:33.896Z |
| license_str | Not specified — see source repository |
| provenance_str_mv | Harvested via OAI-PMH from UCTD — University of Cape Town Open Access Repository |
| publishDate | 2022 |
| publishDateRange | 2022 |
| publishDateSort | 2022 |
| publisher | Department of Chemical Engineering |
| publisherStr | Department of Chemical Engineering |
| record_format | dspace |
| source_str | UCTD — University of Cape Town Open Access Repository |
| spelling | oai:open.uct.ac.za:11427/36032 Monolith Catalyst Supports for Hydrogen Production Mzolo, Ntokozo Fletcher, Jack C Q Roberts, Stephen J Chemical Engineering Due to increasing energy demands and environmental concerns, more research studies arc conducted on alternative energy sources. Hydrogen fuel cells arc one of the desired alternatives. The CCT Catalysis Institute has demonstrated the entire hydrogen production process from propane (LPG) reforming. This is aimed for off-grid and backup pOver supply to rural areas and telecommunication towers respectively. The steam reforming unit employs ruthenium supported on gamma-alumina (Ru/ -AbOo) catalyst.. However, it has been observed that. upon increasing the sea.le, pressure-drop and mass transfer limitations become significant issues. It is, therefore, desired to shift from packed bed reactors to monolithic reactors to overcome these issues. :Vfonoliths arc attractive due to their high open frontal area., stability, good mass and heat transfer, as well as easy sea.ling up. The main focus of this study is to coat. monoliths ,vith a. homogeneous and stable layer of Ru/ AbO3. Viscosity, pH and slurry solid content are investigated as these are the main factors affecting washcoat loading, morphology and adherence. A slurry coating technique was used to deposit. the alumina. layer onto t he monolit hs which were then subjected to ult.ra.sonica.t ion and thermal shock treatment. to test. for adherence. The active phase ,vas deposited by ion exchange and dry impregnation of the alumina coated monoliths by making use of a RuCb.xH"O solution. SEivI was employed to analyse the morphology of the layer, as well as its metal content and distribution. An experimental design soft,vare, Design Expert. was used to generate statistically significant and robust models for the results. It was found that washcoat loading, stability and morphology arc highly dependent on slurry solid content betvveen 20 and 45 v,rt.%, slightly affected by viscosity bet,veen 20 and 45 mPa.s and almost insensitive to pH beluw isoelectric point. Increasing slurry solid content results in an increase in washcoat loading which, in turn, results in thick and inhomogeneous layers which, in turn, arc more prone to cracking and to lo,v mcclmnical and thermal stability. The optimal point. that. gives a. st.able, homogeneous layer a.t the desired loading was identified to be at pH of 4, viscosity of 20 mPa.s and slurry solid content of 20 wt%. The resulting washcoat. layer is 'crack-free', uniform, and characterised by a washcoat loading of 10.8 wt%, an average thickness of 30 m, and mechanical and thermal weight losses of 0.79 and 1.42 wt%., respectively. The ion exchange techniques resulted in small and poorly distributed metal loading while dry impregnation resulted in sufficient metal loading and good distribution throughout t.he monolith channels. 2022-03-10T10:29:07Z 2022-03-10T10:29:07Z 2021 2022-03-08T08:39:13Z Master Thesis Masters MSc http://hdl.handle.net/11427/36032 eng application/pdf Department of Chemical Engineering Faculty of Engineering and the Built Environment |
| spellingShingle | Chemical Engineering Mzolo, Ntokozo Monolith Catalyst Supports for Hydrogen Production |
| thesis_degree_str | Master's |
| title | Monolith Catalyst Supports for Hydrogen Production |
| title_full | Monolith Catalyst Supports for Hydrogen Production |
| title_fullStr | Monolith Catalyst Supports for Hydrogen Production |
| title_full_unstemmed | Monolith Catalyst Supports for Hydrogen Production |
| title_short | Monolith Catalyst Supports for Hydrogen Production |
| title_sort | monolith catalyst supports for hydrogen production |
| topic | Chemical Engineering |
| url | http://hdl.handle.net/11427/36032 |
| work_keys_str_mv | AT mzolontokozo monolithcatalystsupportsforhydrogenproduction |